Hubble Source Catalog Releases v4.0


Version 4 of the Hubble Source Catalog (HSC) was released on June 30, 2026. The Hubble Source Catalog (HSC) is designed to optimize science from the Hubble Space Telescope by combining more than 64,000 visit-based source lists in the Hubble Advanced Products (HAP) and the Hubble Legacy Archive (HLA) into a single master catalog.

HSCv4 has 35% more Hubble visits than HSCv3, which was released in 2018. The new release includes ACS and WFC3 HAP data that were public as of March 17, 2026, along with the older WFPC2 HLA data included in HSCv3. A table matching HSCv3 sources to HSCv4 sources will help users migrate to the new catalog. Note that HSCv3 remains available.

Highlights from Version 4:

  • Expanded coverage: There are 37% more ACS/WFC images, 2.25 times as many WFC3/UVIS images, and 48% more WFC3/IR images than the HSCv3 catalog.
  • Improved photometric quality: HSCv4 has improved photometric quality in the source lists for ACS/WFC and WFC3/UVIS (see Figure 1). This is primarily due to improved alignment of exposures obtained in different filters during HAP processing.
  • Increased astrometric accuracy: The absolute astrometric calibration has improved. Approximately 88% of the images are aligned using Gaia DR3, while another 8% are aligned using the Pan-STARRS catalog. The resulting absolute astrometric accuracy is about 10-15 milliarcseconds. The relative astrometric accuracy (from repeated HST observations of the same source) is about 3 to 8 milliarcseconds, depending on the instrument (see Figure 2).

Access is currently available through CasJobs, while access through the HSC Table Access Protocol (TAP) service and web forms is in preparation. Detailed Use Cases are available, although many of these are still in the process of being updated for HSCv4.

Figure 1: Photometric noise as a function of magnitude for globular cluster M4.  The x-axis shows the magnitude in the WFC3/UVIS F467M filter, and the y-axis is the noise (median absolute deviation). Each point is a single object, and the color of the points represents the local density in the scatter plot. The HSCv4 photometry (bottom panel) has approximately half the noise of HSCv3 (top panel).  The horizontal lines are at the same location in the two panels and indicate the median noise level for stars between magnitude 17 and 18.  The scatter in HSCv4 is only 0.007 mag (less than 1%).

Figure 2: Relative astrometric accuracy for different detectors.  The curves are normalized to have the same integral.  Most of the differences arise from the intrinsic spatial resolution of the cameras, with the smallest pixel scale (WFC3/UVIS) being best and the lower resolution WFC3/IR and WFPC2 cameras having the largest errors.

Links

Social