Follow Us| HP Nor | ||||||||||||||||||
| HP Nor was observed in a relatively high state and was modeled with an accretion disk. The FUSE spectrum was dereddened assuming E(B-V)=0.2. Details on the processing of the observed spectrum and the spectral analysis are given in Godon et al. (2009). The FUSE spectrum has a very low S/N and is contaminated with sharp emission lines (geo- and helio-coronal in origin). The ISM molecular hydrogen absorption features are slicing the spectrum at regular intervals. The only feature that can can be associated with the source and that somehow matches the model (withint the S/N range) is the C iii (1175) line. The ISM absorption features and the day light contamination have been marked in blue in the figure and have been masked before the fitting. | |||||||||||||||||
|
FUSE Data
Synthetic Spectrum
|
These data and models were published in the paper: Godon, P., Sion, E.M., Barrett, P.E., Szkody, P., 2009, ApJ, 701, 1091 | ||||||||||||||||||||||||||||||||||||
Notes on figures:The flux (vertical axis) is given in ergs/sec/cm2/A and the wavelength (horizontal axis) is given in Angstroem. For clarity the spectrum is shown on 3 panels: the upper panel from about 900 to 1000A, the middle panel from about 1000A to 1100A, and the lower panel from about 1100A to 1200A. Air glow emission is anoted above each panel with a "+" sign inside a circle. Strong emission lines reaching the upper part of the frame in each pael is marked just above the panel. The Hydrogen series is marked below the x-axis in the upper and middle panel and the hydrogen cut-off limit is clearly marked around 915A with an increasing density of tick marks. The He I (1168A) is marked below the lower panel. Oxygen I lines are shown with an arrow "OI -->" if many (ISM) OI lines are present, they are just annotated with verical tick marks in the lower portion of each panel. ISM molecular hydrogen lines are either individually annotated vertically (e.g. L10R1) or just marked with an arrow "MH -->" and vertical tick marks (usually in the upper part of each panel). Features resulting from fixed pattern noise introduced by FUSE detect ors are indicated with "FPN;.When a model is shown, the portions of the observed spectrum that have been masked before the spectral fit are in blue, while the rest of the observed spectrum is in red. The model fit is shown the solide line in black (or possibly white). If the model is a composite made of a disk model and a white dwarf model, then these are shown with the dashed- and dotted lines (respectively). Some models include the effect of quasi-molecular HI absorption features, these are labelled "Q-mol" in the spectrum. |
 |
|
|
|
|
|
|
|
|
|