The Multimission Archive at STScI supports a variety of astronomical data archives, with a primary focus on scientifically related data sets in the optical, ultraviolet, and near-infrared parts of the spectrum. See http://archive.stsci.edu/missions.html for a full list of the mission, survey, and catalog data distributed by MAST. MAST is a component of NASA's distributed Space Science Data Services (SSDS).
The staff of the Archive Sciences Branch (ASB) and the Multi-mission Archive at STScI (MAST) provides:
MAST archives a variety of spectral and image data with a range of data characteristics. MAST provides a large suite of searches, including customized searches for each mission. It also provides several cross-mission search tools.
MAST also archives sets of community contributed High-Level Science Products (HLSPs). Users may search for HLSPs by target or coordinates by using the HLSP search page. MAST actively solicits submission of High-Level Science Products related to our missions and we provide guidelines for contributing them to MAST.
The MAST Users Group provides essential user perspectives on archive operations and development, including suggesting priorities for short and long term operational and scientific enhancements to the archive.
Although there is no cost involved in retrieving data from MAST, researchers are requested to include an acknowledgement (as shown in the MAST Data Use Policy and in Chapter 1) in publications that make use of MAST.
All the information in this chapter, and more, is available on the
archive website. It should always be
consulted for the most current information. This web site is the best place to
start learning about MAST and what it can do to enable your research. What follows is an outline of material available on the web.
The MAST web interface provides access to all of our missions and is likely to
be the most convenient option for most users. The JAVA tool Starview provides
access to HST and FUSE observations. Some specialized tasks can
only be performed or may be more conveniently accomplished with StarView. See
The WWW interface vs Starview section of the MAST Tutorial for more information on the difference between MAST web and StarView.
MAST provides several ways to find data of interest. These are listed on a
searches web page (http://archive.stsci.edu/searches.html) for your convenience. Each mission has a specialized search form.
MAST provides several cross-mission searches. Use the VizieR/MAST Cross Correlation
search or NED/MAST Cross Correlation search to cross-correlate a catalog with MAST missions. A full list of cross-mission and speciality searches is provided on the searches web page.
HST and FUSE data are distributed from the original HST archiving system called DADS.
Users request data after selecting observations of interest from the search results
on the web or via StarView. The data will be retrieved and (in the case of the newer HST instruments) reprocessed with the most current calibrations and staged to the users disk or to an ftp area on this server. HST and FUSE data are retrieved in batch mode. The current mean retrieval time can be found on the archive status
page (http://archive.stsci.edu/help/archive_status.html). HST data may also be distributed on DVD or CD. A user requesting proprietary data from HST and FUSE observing programs must be a registered user to obtain these data. Non-proprietary data may be retrieved without registering, via anonymous ftp, although users may always use their registered usernames.
MAST stores final calibrated data for HST/STIS (datasets taken prior to 2005) and HST Legacy Instruments GHRS, FOS and FOC on spinning disk. The data for the GHRS and FOC instruments were processed through the OTFR pipelines at the Space Telescope European Coordinating Facility (ST-ECF) using the best available software and calibration files at this time. The reprocessing effort is documented in two Instrument Science Reports ( FOC-99 and GHRS-92 ). The links are to pdf files containing these Instrument Science Reports.
The enhancements to the STIS calibration are discussed in the Update on STIS Closeout Calibration memo, posted on the STIS website.
This alternate interface to the HST legacy data is provided because the final calibrated data for FOC and GHRS have not yet been ingested into DADS. NB: As shown in Table 2.1, a request to DADS will retrieve the data processed close to when they were taken since OTFR was never implemented for the old instruments (GHRS and FOC). The final calibrated data are expected to be ingested into the HST archive sometime in 2008, but until they are, this alternative interface will exist. The final calibrated data for the FOS instrument is also available via this online archive. Even though this FOS data can be retrieved via DADS, this online interface provides direct access to the data on disk. The recalibrated STIS data (prior to 2005) are also available via the online archive. These STIS data may also be retrieved via DADS. Both interfaces provide the same data for FOS and STIS.
The search interface for the Legacy Instruments is very similar to the general HST search interface. The main difference is that data marked for retrieval will be downloaded directly to your computer in a tar file. The download does not utilize the DADS batch retrieval method and should therefore be faster.
2.1 MAST Interfaces
2.1.1 Finding Data
2.1.2 Obtaining Data
2.1.2.1 Data Archive and Distribution Service (DADS)
2.1.2.2 HSTonline
| Dataset | HSTOnline | DADS |
|---|---|---|
|
STIS
| reprocessed | reprocessed |
|
FOC
| final calibration | original |
|
FOS
| final calibration | final calibration |
|
GHRS
| final calibration | original |
The data are also available via anonymous ftp. FTP to archive.stsci.edu logging in as anonymous. CD to pub/hstonline. The data are stored in a set of subdirectories following the format /pub/hstonline/XXXX/datasetname where XXXX is the first four letters of the dataset name, effectively grouping the data by proposal. For dataset X0ND0101T the path would be pub/hstonline/x0nd/xond0101t.
All MAST data, other than HST and FUSE, and all the HLSPs are stored on spinning disk. Users may select desired data from the search results pages for most MAST missions and download the data directly to disk via their browsers. For HLSPs, see the summary of HLSP
downloads options for more information (http://archive.stsci.edu/hlsp/hlsp_download.html).
If you don't quickly find the information you need, try the site search (http://archive.stsci.edu/google_search.html). You may also email us at archive@stsci.edu.
An extensive on-line tutorial describes various features of MAST, only some
of which will be dicussed below. See the
web site, http://archive.stsci.edu, for a description of the top level web page, information on navigating the site and the tutorial.
There is a web based interface for every MAST mission, including the Digitized Sky Survey (DSS) and Guide Star Catalog (GSC). The GALEX interface is
similar, but relies on different underlying software and may differ from other
missions in some respects. The heading for each form item is a link to a help
page with more information on that field and how to best use it in a search.
The mission search pages are listed on the Searches page under mission specific
searches. There is also a link to each mission search on the "mission navigation
bar" and under the Search & Retrieval left menu pullout for the appropriate missions.
For most missions, there is a "standard form" and a "file upload" form, which
allows users to upload a list of targets. The search forms consist of three
sections.
For the "file upload form", the top section helps you describe the format
of a file containing a list of targets or coordinates you wish to search on.
Click on the column labels for additional help. The local file name is the
name of the file on your system. The file must be an ASCII text file
with one entry per line with the fields (e.g. RA, Dec, data_id and/or target_id) separated by one of the allowed delimiters. Coordinates may be in several formats including sexigesimal or decimal degrees. Use the form to designate in which column the data_id, target name or RA and Dec are to be found. If appropriate designate the delimeter (tab, |, comma (,), semi-colon(;)). Choose the desired resolver or
the "Don't Resolve" option.
Check the Make Rows Distinct box if you would like to see a distinct list of objects with certain criteria. For example, all the objects within an IUE or FUSE object class. For this example, limit all but the "Target Name" (or RA and Dec); this is done with the "Remove" button in the Output Columns window. This action permits a selection only on unique targets names (or coordinates) that have been observed by the satellite for the object class given.
The number of rows returned and the number of records per page are selectable using the menus.
The user may specify one of HTML, CSV, Excel or VOTable as appropriate for the output format of the search results. The default is HTML.
The main item of interest on the output page is the listing of rows found
as a result of the search. As a default only the first 200 rows are displayed with 50 records per page. One of the output options is to increase the number of rows displayed. Be aware that when a large number of rows are displayed, the page may render very slowly. The Mark button column for proprietary HST and FUSE data is displayed with a yellow background to easily flag those data as proprietary.
Results can be sorted by clicking on the column title at the top of the display. To get a description of the column, click on the column title at the bottom of the display.
To see a preview (if available), click on the Data ID. A separate preview page will be displayed. A link, "Display all previews as thumbnails," will display all the previews as thumbnail images.
Click on the number in the Ref colummn to get a list of the publications based on these data.
Above the output display is a link to allow numeric columns to be displayed
graphically using VOPlot. If a resolver (SIMBAD or NED) was used, the resolver
output is displayed. If you have chosen to display the SQL used to search the
database the query will be displayed. A series of additional comments explaining
various links may be included in this section. A variety of links are available
as part of the search output (assuming the appropriate columns have been chosen
for display). The dataset name is usually a link to a preview page which includes a preview version of the image or spectra as well as additional information and links. If the "reference" column is displayed the number indicates the number of refereed journal articles in which the data has been used. For HST, the references are categorized by proposal number, so not all individual observation in that program may have been used. For HST, FUSE, IUE and EUVE, the proposal id is a link to a listing about that proposal. It includes the abstract, any associated journal articles and a listing of all the observations acquired for that program.
Some observations have been used to create "High-Level Science Products" which
are hosted at MAST. The number in the column labeled High-Level Science Products
indicates the number of products associated with that observation. Click on
that number to see a list of the products. Also listed may be associated previews and readme files.
For spectral observations, you may coplot multiple spectra by choosing
the observations to be plotted and then clicking on the "Plot marked spectra"
button. You may choose a variety of scaling factors to customize the plot and replot the data. The customized plotting program may also be accessed from the preview.
To request data, mark the datasets of interest and click on the button to
retrieve or download data. For HST and FUSE data, a retrieval options form
will give you options for data delivery and for the type of files to be
requested. For IUE, you may choose to have final data product (MXLO and MXHI)
files downloaded or the "more options" file which will allow you to choose
among the NEWSIPS and the original IUE data products. Data for HST and FUSE
will be delivered as individual files according to the chosen data delivery
options. Other MAST data will be delivered as a tar or zip file (as you choose)
directly to your computer. More detailed information about retrieving data from
MAST is in the section Retrieving Data.
The CSV output is a simple ASCII file containing column headings followed by
comma-separated entries. In file upload mode, a blank line is inserted between
database queries. (Note: this option will execute more quickly than the others
since it involves the least amount of processing).
The search results are stored as an Excel spreadsheet table (note: assumes the user's
computer/browser provides support for Excel-format files).
Search results are returned in an XML file format developed by the VO project.
For searches returning results from more than one mission and/or target, multiple
"resource" tags are created. A list of the output fileds for a particular mission/catalog may be obtained by searching on that mission/catalog with a radius of 0 (zero). See the VOTable documentation
at the IVOA website (http://www.ivoa.net/Documents/latest/VOT.html) for more information.
The MAST "Pointings" interface allows a user to search for ACS, WFPC2, NICMOS,
STIS and FOC exposures in a powerful way. The interface can be found at
http://archive.stsci.edu/pointings/search.php. A description of how a "Pointing"
is defined can be found on the pointings search help page. You can run the pointings search interface as a web service.
For each of these instruments we have assembled a searchable data table that
allows users to look for sky regions (or pointings) which have been observed
more than N times, observed with 2 or more filters, or have been observed more
than twice with a time separation of more than (or less than) N days.
Included in each table are the total number of exposures for a pointing and
the number of unique bands. The table also lists the date/time of first and
last exposure for every pointing.
An example of the kind of query this table will allow is: How many high
galactic latitude observations exist [for RA between 9 - 18 hours in the
northern hemisphere (dec > -20) observable from the northern hemisphere
in the early spring] where there has been at least two observations, and
where at least one of those observerations was in the I-band, and at least
one of those observations was in any other filter?
MAST provides a number of web services. The currently available services and their allowable parameters are listed on the MAST web site at http://archive.stsci.edu/vo/mast_services.html.
A GET request allows the search parameters to be included in the URL. As such, they can be called from within programs to automate data searches. The results can be returned in a variety of formats including HTML, VOTable XML format, excel spreadsheet, and comma-separated values which can simplify ingesting results into user-written programs. In addition, submitting GET requests can bypass restrictions currently placed on the web search forms (e.g., restrictions on the max_records value).
Note: when creating URLs, special characters must be encoded. URLs may only use alphanumerics [0-9a-zA-Z], the characters "$-_.+!*'()," and special reserved characters. The characters "<" and ">" must be specified as "%3C" and "%3E" respectively. For example, to specify a parameter such as RA > 120, the GET request parameter would be RA=%3E120. Blanks can be specified using the "+" character.
Scripts for retrieving MAST search results can be written in many programming languages. Basically you just need to download and extract information from a web page. A few simple examples are shown below.
2.5.1.1.1 Sample PHP Script
Search HST archive and print results:
2.5.1.1.2 Sample Python Scripts
Search Pointings archive for ACS images more than 75 degrees from galactic plane with < 5 exposures in U band AND more than 1 in I band, output as comma separated list save results in file out_py.txt
2.1.2.3 Other MAST data and HLSPs
2.2 MAST Web Tutorial
2.3 Mission Web Search Interfaces
2.3.1 Search Forms
On the "standard form", the top section consists of a place to enter a
target name or coordinates. When you enter the target name you can choose to
have the coordinates looked up via SIMBAD or NED using the Resolver options
field. The search is then done using the coordinates returned from the selected
resolver. You may choose to search on a character string by choosing the "Don't
Resolve" option in the Resolver options field. To maximize the chance of finding
the targets, surround the choice with wild cards e.g. *Jup* to find observations
of Jupiter. You may also choose the search radius (the default is to 3 arcmin).
The middle section of the search page contains mission specific fields,
that can be used to perform searchs on dataset name, exposure time, start time, dataset name and/or observers name. Users may add any two additional search fields using the "User-specified fields" at the bottom of the middle section of the web-based form. For more information about the available searchable fields click on the link "Field Descriptions". This brings up a page describing all the available columns (the database column name, the label, the data type, the valid values in that field) and additional notes where applicable.
The third section gives you choices for how to format the output of the search
results. On the left side a list of columns is displayed. These default
columns were chosen as the most commonly needed columns. You may remove any
of the columns by highlighting that column and clicking on the remove button
to the right. You may add columns by choosing columns from the select box below
and clicking the add button to the left of the select box. You may change the
order by clicking on field in the output columns box and click on the up and
down buttons to the right. Clicking on the reset button will restore the
default output columns settings. You may choose to sort the output by up to
three columns. You may choose from four output formats: HTML, comma separated value
text, Excel spread sheet, and VOTable format. The HTML format is the format
that will give access to previews and other useful links as well as retrieval
options. Click on the headings for additional help.
In the lower right hand section of the search form are the "Show Query" and "Make Rows Distinct" checkboxes and the "Maximum Records" and "Records per Page" menus. To see the SQL query produced for your search, check the Show Query box. The SQL will be displayed at the bottom of the search result page.
2.3.2 Search Results Output
2.3.2.1 HTML output
2.3.2.2 Comma Separated Values (CSV) Output
2.3.2.3 Excel output
2.3.2.4 VOTable output
2.4 HST Pointings Search
Galactic Latitude Above & below plane +/- > 20.0 degrees
Band I >0
Number of Unique Bands >1
Total Number of Exposures >1
RA 09..18
Dec >-20.0
2.5 MAST Web Services
2.5.1 HTTP GET Requests
2.5.1.1 Script Examples for GET Requests
#!/archive/data1/bin/php -f
<:?php
#
# standalone PHP program
# (edit top line to point to local PHP executable)
#
# Submits GET request to search HST archive for given RA, Dec, and radius,
# limit results to 10 records,
# returns data set name, RA, Dec, and Target name
# as a comma-separated list
# prints out column headings and data
#
# create GET request
$request = "http://archive.stsci.edu/hst/search.php?"; //quotes url
$request .= "RA=53.084&DEC=-27.873&radius=1.0&max_records=10&";
$request .= "outputformat=CSV&action=Search";
$request
.="&selectedColumnsCsv=sci_data_set_name,sci_ra,sci_dec,sci_targname";
print "\nrequest = $request \n\n";
# download results from MAST as an array called $data
# (ignore errors)
$data = @file($request);
# print column headings (skip data types in next row)
print "$data[0]\n\n";
# now print search results
$cnt = count($data);
for ($i=2; $i<$cnt; $i++) print "$data[$i]\n";
?>
#!/usr/local/bin/python
# change above line to point to local
# python executable
import urllib, urlparse, string, time
# create URL with desired search parameters
url = "http://archive.stsci.edu/pointings/search.php?"
url = url + "primary=ACS&outputformat=CSV"
url = url + "&pnt_ucountp=%3C5&pnt_icountp=%3E1&bao=and"
url = url + "&galactic=Above&galsearch=75"
url = url + "&action=Search+Exposures"
print url
# retrieve URL and write results to filename
filename = "out_py.txt"
urllib.urlretrieve(url,filename)
### Done!
| Mission | Link |
|---|---|
| General Search Parameters | http://archive.stsci.edu/vo/general_params.html |
| HST-specific search fields | http://archive.stsci.edu/hst/help/quickcol.html |
| Pointings-specific search fields | http://archive.stsci.edu/pointings/help/quickcol.html |
| IUE-specific search fields | http://archive.stsci.edu/iue/help/quickcol.html |
| HUT-specific search fields | http://archive.stsci.edu/hut/help/quickcol.html |
| EUVE-specific search fields | http://archive.stsci.edu/euve/help/quickcol.html |
| FUSE-specific search fields | http://archive.stsci.edu/fuse/help/quickcol.html |
| UIT-specific search fields | http://archive.stsci.edu/uit/help/quickcol.html |
| WUPPE-specifc search fields | http://archive.stsci.edu/wuppe/help/quickcol.html |
| BEFS-specifc search fields | http://archive.stsci.edu/befs/help/quickcol.html |
| TUES-specific search fields | http://archive.stsci.edu/tues/help/quickcol.html |
| IMAPS-specific search fields | http://archive.stsci.edu/imaps/help/quickcol.html |
| HLSP-specific search fields | http://archive.stsci.edu/hlsp/help/quickcol.html |
| Copernicus-specific search fields | http://archive.stsci.edu/copernicus/help/quickcol.html |
In general, any parameter listed on the HTML search form can be specified in a GET request. If you are parsing the results, it would be easier and probably faster, to request the search results in CSV or VOTable format using the "outputformat" parameter.
Mission search examples:
Notes:
MAST missions can also be searched using the NVO Simple Cone Search protocol (SCS). The base url is the same as for MAST mission searches (i.e., http://archive.stsci.edu/[data_set]/search.php) without the "action=Search" parameter. The search radius parameter "SR" must be included in the URL for the cgi script to recognize a simple cone search is being requested. Besides the search radius in decimal degrees, RA and DEC parameters are also required to perform a cone search. The results are returned in VOTable format. The SCS protocol can be used with any MAST mission and the general MAST parameters can be included as well. Examples:
MAST missions can also be searched using the NVO Simple Image Access protocol (SIAP). The base URL is http://archive.stsci.edu/siap/search.php
followed by the SIAP parameters. Like the Simple Cone search, the base url is similiar to that for mission searches however only missions with image data are searchable. By default, up to 300 entries will be returned but specifying max_records=nnn can override the default. Adding the parameter "representative=y" will return only "representative" images as defined for the MAST scrapbook tool. Currently the list of instruments, and High Level Science Products (HLSPs) that can be queried using the SIAP include:
SIAP Examples:
The Simple Spectral Access Protocol (SSAP) will be supported when the new standard has become better defined. See also the Simple Spectral Data Model. Plans are being made to support SSAP for all MAST missions containing spectral data.
SOAP (simple object access protocol) is an XML-based messaging protocol. MAST has one SOAP-based web service which is accessed via the ADS (Astrophysics Data System). The web service allows users to enter a data set name and find where that data is archived. The service can be accessed from the web form at:
http://ads.harvard.edu/ws/DataVerifier, or, using the latest ADEC naming conventions:
http://vo.ads.harvard.edu/dv/DataVerifier.cgi .
Another MAST web service is our RSS news service. This is a list of our most recent news items which can be requested in HTML or RSS XML-format:
MAST provides and develops tools that archival users may use to find and view data in the archives. The current tools are several types of searches, two display tools for spectra and a scrapbook. Check the Tools menu on the main archive web page for a up to date listing.
The NED/MAST Cross Correlation Search permits users to search the NED catalog
by object name, position, object category etc. and optionally cross-correlate
results with MAST mission databases.
NED search results are retreived as a web service, and the results are either
displayed directly, or the retrieved coordinates are used to display MAST mission
observations that are within a specified search radius of the retrieved catalog
entries.
First search for a VizieR catalog. When searching for a catalog name, you will
often be more successful if you search using a wild card (e.g. *Abell*). The
results of the search list the catalogs found at VizieR with two options to
the left of each found catalog (S and CC).
Specview is a 1-D spectral visualization tool written in Java for analysis of
astronomical spectrograms. It is capable of reading all the HST spectral data formats, as well as data from several other missions (such as IUE, FUSE, ISO, FORS, HUT, EUVE and SDSS), and data from generic FITS and ASCII tables.
Once ingested, data can be plotted and graphically examined with a large selection
of custom settings. Specview supports instrument-specific data quality handling,
flexible spectral units conversions, custom plotting attributes, plot annotations,
hardcopy to a PostScript file or printer, etc.
A spectral feature quick measurement tool enables the user, with a few mouse
actions, to perform and record, in VOTable or FITS format, measurements on
selected spectral features.
Specview can be used to overplot or combine data from the same astronomical
source taken with different instruments and/or spectral bands. It has a spectral
model fitting capability that enables the user to work with multi-component
models (including user-defined models) in a number of ways, and fit models to data.
Specview can overplot spectral line identifications taken from a variety of
line lists, including user-supplied lists.
To download Specview or for more information see the Specview page (http://www.stsci.edu/resources/software_hardware/specview).
MAST staff have written a tutorial (in Powerpoint format) that shows how to use the spectrum combination/filtering functions. See http://www.stsci.edu/resources/software_hardware/specview/tutorial.
The MAST Spectral Data Coplot utility allows users to coplot multiple spectra
from MAST's holdings of spectral data. For HST instruments, the plotted data
are obtained from the preview files produced by CADC. For the other MAST missions,
the data is extracted from the ASCII preview files. In both cases, differences
may exist between these data and those found in the distributed FITS files. The
current list of data sets to choose from includes: STIS, IUE, EUVE, HUT, BEFS,
TUES, FOS, GHRS, and WUPPE. Other mission data sets will be ignored. See the
Spectral Data Coplotter Help page for more information
The MAST Spectral/Image Scrapbook is designed to allow users to take a quick
look at representative data in the MAST archive for a particular astronomical
object of interest. It is particularly useful if the user is not already familiar with the datasets involved. Objects such as planets, comets and asteroids are NOT included in the Scrapbook.
The tool utilizes catalogs of "representative" spectra and images compiled by the MAST staff. Each table lists unique datasets representing either an object or unique pointing observed by MAST missions or instruments. Datasets are listed for an assortment of bandpasses, depending upon on the instrument and availability per target or pointing. A description of the automated process used to select the representative spectra and images is available. Note that these are "representative" spectra or images, not necessarily the "best".
The scrapbook help page describes the scrapbook interface and includes descriptions
of the input parameters and output.
The best search to use depends on what you are trying to locate. Several hints are presented in the following sections.
Using coordinates to search the archive for moving targets such as planets and comets is not usually the most efficient way of locating such observations. The most straightforward way to search for observations of such a target is to search on the target name using the "Don't Resolve" option in the Resolver form element.
For some missions, such as HST, the target name is designated by the
original observer. For example, an observation of Jupiter might have the target name "CP1-JUP-NORTH-LIMB-A". To find all the items of interest you may want to use a wild card search using the minimum number of characters. To do this enter *JUP* in the target element of the search form. You must remember to choose the "Don't Resolve" option in the resolver form element. You can narrow the search using such items as the time of observation, instrument, filter etc. This type of search may take a little longer than a search by coordinates.
For a few missions, targets have been assigned an object class or category. You can utilize this to find all solar system objects. For shorter duration missions, such as HUT or UIT this might be the most efficient way of searching for planets or comets. For longer term missions such as IUE and FUSE, this type of search will return many rows unless you are able to narrow the search using other criteria such as time or exposure length.
Another way to locate observations of solar system objects is to search the abstracts of missions with a Guest Investigator program (HST, FUSE, IUE, EUVE). Entering the target of interest into these search forms will find programs that planned to observe the target. A list of the programs contains the abstract as well as links to listings of the observations associated with that program.
Using the VizieR/MAST Cross-correlation tool is another way of finding classes of
targets within the MAST archive. See the section on VizieR/MAST Cross Correlation
Search for more information.
There are two object category fields in the archive for HST data: the "broad category" and the "target description" fields. The target description field is one of the fields explicitly listed on the HST search form. This is the longer description and probably the more useful search field. You may also search on the broad category utilizing the User-specified field options on the search form.
The format is NOT uniform and so you will need to utilize wild cards to search on a
keyword or phrase. The keywords might be separated by semi-colons, spaces, or dashes so you will need to place a wild card between each word or phrase in the search criteria. For example: *GALAXY*SPIRAL*. This search will find most of the observations of interest. However, word order is important so you might need to try *SPIRAL*GALAXY* as well.
Searches on object category fields are likely to return many rows. You may wish to
further qualify your search by instrument, filters etc.
Every morning a list of all the target descriptions currently in use is generated (http://archive.stsci.edu/hst/daily/target_descriptions.html).
This list is linked back to the HST Science Search page, so you can read through this list (or search it with your browser's find capability) and find datasets matching the description.
The MAST "pointings" interface allows a user to search for ACS, WFPC2, STIS, FOC and NICMOS images in a powerful way. For each of these instruments we have assembled a searchable data table that allows users to look for sky regions (or pointings) which have been observed N times or more, observed with 2 or more filters, or have been observed more than twice with a time separation of more than (or less than) N days. An exposure is defined to be the file created after the shutter closes. The total number of exposures for each of the defined bands within a defined pointing were tallied. The definition of a pointing is different for each instrument. See the Search Help page for a more complete description of the methodology used to define a pointing. This page also includes descriptions of the search fields and the input and output columns.
You may search on ranges of right ascension or declination using the ".." operator.
For example, you can enter 21h 51m .. 21h 52m for the right ascension, and
28 51 .. 29 51 for the declination. Comparators can also be used, i.e. ">", ">=",
"<", "<=". For example, > 85 as a declination value will return all observations with declination larger than 85 degrees. (Note when ranges of coordinates are specified the search radius will be ignored. Also, searches on ranges can be quite time consuming.)
Searching on ranges of time is important if you wish to search on any time field.
If you enter the date July 19, 2002, then midnight (00:00:00) is assumed. If you
enter July 2002, then the date July 1, 2002 at midnight is assumed. If you don't
know the exact time of an observation then you will need to search using a range.
To search for observations before a given date, use <, and for observations after
a given date, use >. For example,
You can use the .. operator to search on a range of dates. To find all observations
in July 2002 enter:
This operator is inclusive on the first date and exclusive on the second.
Finally, you can search on a list of dates or date ranges. For example,
Jul 1 2002 .. Jul 3 2002, Dec 1 2002 .. Dec 6 2002
will search for observations done within either one of these date ranges.
The MAST Cross Correlation Search permits searches across all the HST instruments
and other MAST missions. This interface is similar to the mission search forms. For
more detailed information about search options see the help page.
The top section is the same as the mission search forms and includes both the
standard and file upload options. The second section permits selection of the
instruments of interest. You may customize the search radius for any of the
instruments. The third section gives some options such as the output format, but
the options are not as extensive as the mission search pages.
The output from the search is grouped by instrument. Up to 10 rows are displayed
for each instrument, but the number of available rows is displayed. The output
utilizes the default output fields for each instrument/mission. The HTML version
includes links to the previews, the proposal search, the references and High-Level
Science Products. At the bottom of the output display is a summary listing each
instrument and the number of observations found per instrument. The summary is not
listed in the CSV, Excel and VOTable formats.
The results list the proposal id, the title, the PI and institution and the
abstract. Search criteria are highlighted in red in the search result display. The
proposal ID is a link to the proposal search. For HST, the PI name is a link to a
search that lists other HST proposals by authors with that last name.
You can find the abstract search on the Searches page under the mission specific searches. There is also a link under the Search & Retrieval left menu pullout for the appropriate missions.
There are two kinds of High-Level Science Product (HLSP) searches. One is a search by Project (http://archive.stsci.edu/hlsp/index.html) and the other is a search by target (http://archive.stsci.edu/hlsp/search.php).
This is a simple form with three search criteria: Product Type, Wavelength, and
Object Type. The attributes were assigned by the MAST staff scientists. To search select one or more of each criteria. Hold down the shift key to select more than one option per category. After you click on the Search button, a list of pertinent sets of HLSP is displayed. The form includes a listing of all the HLSP sets grouped by Product type. The search results use the same display format. The title is a link to a web site giving more information about that set of data. Most sets of HLSP have a "Search" button link to the left of the title. Click on that search button to get a listing of all the HLSP products from that project. A few sets of data have not yet been completed or are not actually hosted at MAST. These do not have a search button.
This search looks like a mission search form with the usual three page sections. As usual, the top section allows you to enter target names or coordinates. The second section permits you to specify specific projects and limit the search by instrument, product type and format. The third section permits you to specifiy the output content and formats.
The output lists the project, filename and other associated information. The project id is a link to a webpage giving more information about that project. The filename is a link that permits you to download the data directly to your workstation or desktop. Most HLSP are also stored in the anonymous ftp area on archive.stsci.edu.
Links to the HLSP searches may be found in the left navigation menu for the main MAST page and for each mission with associated HLSP. The searches are also on the searches web page linked from the top navigation bar which appears on most MAST web pages.
You may need to perform searches and make requests for large amounts of data. The archive web based search form currently limits the number of rows returned from a query to a maximum of 1500 rows. If your search that will return a larger number of rows, you may wish to use one of the MAST web services. See http://archive.stsci.edu/vo/mast_services.html. The web page documents how to use web services to make a large search.
If you intend to retrieve large amounts of HST data, consult the large searchs and request page (http://archive.stsci.edu/hst/bigsearch_request.html). The page documents some operation limitations that need consideration.
Previews are available from the results pages of most of the mission searches. Preview pages for most MAST missions include the following information:
HST previews for science observations are created by CADC. HST previews are stored as FITS files and the gifs are created on-the-fly. Users may retrieve the preview data in a variety of formats including the original FITS file. Just beneath the gif image are two links. The link "FITS format" will download the original FITS file. The link "More preview format options" will bring up a page so that you may choose the format you desire.
FUSE previews are provided by the FUSE project. In addition to a "quicklook" preview, there are links to four gif images showing summed plots for each channel (i.e., A and B) for each detector (LiF1, LiF2, SiC1, SiC2). Following the summed detector plots is a table of links to gif images showing data from the individual exposures. There is a web page with more information about FUSE browse files or previews.
IUE Previews show the extracted spectrum and the SI browse file (an image). The most commonly used previews are those constructed from the IUE Final Archive data "mx" or extracted data files. These previews are displayed by clicking on the data id in the search results page. The preview contains a link to more information about the MX previews. The IUE browse files were conceived and originally implements by Dr. Derck Massa, Dr. Nancy Oliversen, and Ms. Patricia Lawton, then members of the GSFC Astrophyics Data Facility (ADF) staff under direction of Dr. Michael Van Steenberg. Some modifications were made as part of the transition to MAST maintenance.
Near the bottom of the preview page there are a set of links. One link is to the SI
browse file, the image file from which the spectra were extracted. More information on the SI browse files is available from a link on the SI preview page.
The IUE was operated from two different tracking stations: GSFC for NASA and Villafranca Spain for ESA. The original observing notes for the data acquired from the GSFC station have been scanned and are available from a link on the IUE preview pages. To keep down costs, the exact mapping between the scanned page to the image sequence number was not made at the time of scanning. A good guess can be made, and the link to the program that guesses which scanned page is of the desired observing script is available from the preview page. Look at the thumbnails from the pages nearby the best guess and click on the appropriate thumbnail to see the entire observing script.
An option to display thumbnails of all the search results previews is available on the XMM-OM, FUSE, EUVE, IUE, HUT, UIT, WUPPE, HPOL, TUES, and BEFS search results pages. Click the "Display all previews as thumbnails" link at the top of the page. This allows users to quickly compare the images or spectra of their search results.
Several sets of High-Level Science Products have previews associated with them. See the pages of the individual HLSP Projects (http://archive.stsci.edu/hlsp/index.html) for preview availability.
By its nature, the archive contains very different datasets, not all of which can be retrieved in the same manner. In addition, users have different needs and what works for one may not work for another. The following sections describe various retrieval options.
HST and FUSE data, excluding previews, are stored within the Data Archive and Distribution System (DADS). The DADS system has several functions beyond the basic retrieval of data. DADS contains an On The Fly Reprocessing (OTFR) feature. Data from the currently active HST instruments are reprocessed at each request to ensure that the latest calibrations and header corrections are applied. DADS distinguishes and handles proprietary data for both HST and FUSE. You may choose to have the data staged in an archive staging area or transferred directly to your computer. Requests for HST data may also be written to DVD or CD-R.
In earlier versions of DADS, you were required to register to retrieve any HST
or FUSE data, but now registration is only required for proprietary data, although
most users still register and use their archive accounts to request data. It is
easy to register and to maintain your account. If you have forgotten your
password, you may ask for it to be emailed to the email account designated at the
time of registration. You may maintain your own account, keeping your address and
phone numbers up-to-date with no need to interact with archive personnel. If you
are requesting only public data and you are not having the data written to DVD or
CD-R, you may request data anonymously. When asked for your account, enter anonymous
and enter your email address as your password. The email address is used to notify
you when your request has completed or if there is a problem with your retrieval.
If you are an HST or FUSE Guest Observer/Investigator, you must contact the
archive helpdesk, to let them know that you wish to request your proprietary
data and supply the program ID. Archive personnel will confirm that the user is the
PI of the program. If you are a PI that wishes to share data with a Co-I or collaborator, you must contact the archive helpdesk and give the archive account name you wish to authorize to access the data. Co-I's cannot request data until they are authorized in this way. You can easily tell if data are proprietary as the background of the "Mark" button on the search results page is bright yellow.
In general, data are retrieved by performing a search using the web interface or Starview, and then marking the data to be retrieved. A page with a retrieval options page is displayed. You will be asked for your archive user name and password. As stated above, you may enter anonymous as the username with your email address as the password if you are not requesting proprietary data.
You will be asked to specify one of the following data delivery options:
If you choose to have the data transfered to a specified location, you must indicate the hostname, the directory, the username and password DADS should use to log in to deliver the data. YOU are responsible for making sure that there is sufficient disk space available for the data. If the transfer fails, the data will be written to the staging disk and you will be notified via email.
You will be asked to designate the type of files requested. This is different for HST and FUSE data. Help on the file types is available from the request options page.
Retrieve data from the staging disk on archive.stsci.edu by logging in with your
archive username and password. If you retrieved data anonymously, you will use anonymous as your archive username and your email address as the password.
If you issue a dir command you will see the the pub directory where other MAST
data and the MAST High-Level Science Products are stored and a directory called stage.
The dads retrieval data is stored in that directory in a subdirectory with your username. Data requested with the anonymous username, is stored in a subdirectory called anonymous. You will only be able to see and access these two directories. With in "your" subdirectory will be a subdirectories containing the data named by the request id.
A typical ftp session might look like this:
After you have successfully downloaded the data from your directory, you may
delete the data. Although the data are removed automatically about 4 days after the
request completes, during peak usage times the disk does tend to fill up, so it is
helpful if you delete data that you have already retrieved. A typical session to
delete files might look like this:
As the archive has expanded, some users need to make requests for large amounts of HST data. Please consult the Large Searches and Requests page at http://archive.stsci.edu/hst/bigsearch_request.html#requests.
It explains the best methods and some guidelines for ensuring a smooth and complete finish to your large requests.
Other MAST data, e.g. GALEX, IUE, ASTRO, ORFEUS and VLA-FIRST, are stored on spinning disk. These data may be downloaded from the search interface or via anonymous ftp. Do see the GALEX chapter for information specific to GALEX.
After performing a search for observations of interest, you can to download the data to your computer utilizing the download data option on the search result page. Data download is available from the html formatted search results page but not from the other output formats.
Choose the observations of interest by clicking in the "Mark" box. If you would
like to retrieve all the data on the results page, use the "Mark all" button at the top and bottom of the page. The requested data will be packaged and downloaded in a single tar or zip file. You may choose the type of file. Click on the "Download selected datasets" button. A dialog box will open, giving you options for downloading the data. For most missions you will receive all the files for the selected datasets. The VLA-FIRST data are currently downloaded one file at a time by clicking on the Data ID.
The options for IUE data are slightly different because two versions of the IUE
data are available. The versions relate to the type of processing: the Final Archive
data products (NEWSIPS) or the products from the original IUESIPS processing pipeline.
There are two buttons on the search results page to download data. The "Download NEWSIPS MX files as a .tar file" option will download the files of extracted spectra for the marked data. The "More retrieval options" button will bring up a form that permits you to select which files and format you wish to download. At the top are two menu boxes to select NEWSIPS or IUESIPS data products. The default is the MX data from
NEWSIPS. To download IUESIPS data you will need to select not only the files but
the data type using the Download menu. There are three types: NEWSIPS (which are
FITS files), IUESIPS in the "GO" format (files are in the original VICAR label format), and IUESIPS_RDAF which reads the IUESIPS GO formats and places them in the format easily utilized by the IUE RDAF software. This option is for the convenience of
long-time IUE users. The IUE RDAF software can utilize all the formats. Clicking
on the "Submit Request" button will bring up the dialog box with options for downloading the data.
EUVE data may be downloaded
from the search results page. The links to the data are in the column labeled Data
Files. Clicking on the IMG link will bring up a download dialog box to download the
image file; right clicking on the SPEC link will download the file. Similarly, VLA-FIRST data are downloaded from the search results page by clicking on the Data ID file.
MAST data other than HST and FUSE may be downloaded via anonymous ftp. FTP to
archive.stsci.edu as anonymous using your email address as the password. Change
directory to pub and then cd to the mission with the desired data. The HUT, UIT
and WUPPE data are under a directory called astro and the BEFS, TUES and IMAPS
data are under a directory called orfeus. All data are stored in a subdirectory
called data with further subdirectories grouped by dataset name. For some missions
the dataset name includes the targets, for others the dataset names are basically
sequence numbers and you will need to know the name of the dataset you would like.
For example, here's how to download HUT data for U Gem.
IUE data are organized in directories by camera. Within each camera directory
are directories where the data are grouped by image sequence number. For example in
pub/iue/data/lwp/01000 are all the files (both NEWSIPS and IUESIPS) for image sequence
numbers 01000 - 01999.
The pub area has been set up so that you may display the contents of an ftp
directory in a browser. For example, to see the entire set of files available for
the BEFS dataset befs1001 you would use the url:
ftp://archive.stsci.edu/pub/orfeus/befs/data/befs1001/. By using ftp rather than http,
you should get a dialog box when you click on the file you wish to download. If you use http, then you will need to right click on the file name to see the download options.
You could also use the "wget" tool. The general path for the data in the anonymous ftp area is: http://archive.stsci.edu/pub/mission/data/datasetdir
Most of MAST's spectral data are available as ASCII text files. The files are
available from the preview page or via your browser. In general, the url follows this
template: http://archive.stsci.edu/browse/previews/mission/txt. As an example, EUVE
ASCII files are at: http://archive.stsci.edu/browse/previews/euve/txt/. Note that for
ASTRO and ORFEUS missions the url would include the appropriate shuttle mission name
before the mission as in http://archive.stsci.edu/browse/previews/orfeus/tues/txt/.
If you use http in the url name, then you will need to right click on the file name
to see the download options. By using ftp in the url rather than http, you should
get a dialog box when you click on the file you wish to download.
Note that for some missions such as EUVE and FUSE, the data are not exactly the same
as the contents of the fits files. The FUSE project strongly recommends that the FUSE
ASCII data be used ONLY as a preview and not be used for scientific analysis.
MAST archives a growing number of High-Level Science Products. Most are located in
the anonymous ftp area and may be retrieved via browser, anonymous ftp and from the
HLSP search results page as described in the page describing HLSP download options.
MAST has archived several sets of High-Level Science Products on spinning disk in an
anonymous ftp area on archive.stsci.edu. Users may also download the data from several browser interfaces. Currently, a few of the High-Level Science Products are not stored in the anonymous ftp site, but these may be moved into this area over time.
MAST does not archive all of the HLSPs listed on the HLSP page, but includes links to
the off-site websites. Obviously, these instructions are not pertinent to those
"off-site" HLSP.
In general, the HLSP are stored in subdirectories in the hlsp directories. A few
sets of HLSP - the Hubble Deep Field, the Hubble Deep Field South, Helix Nebula,
the Magellanic Cloud Planetary Nebula, and the Medium Deep Survey are in
subdirectories under the pub directory.
The pub area has been set up so that you may display the contents of an ftp
directory in a browser. For instance, to see the entire set of products for
the GOODS Version 1.0 you would use the url:
2.9.3.3 Downloads from the High-Level Science Products Search Form
Users who use the HLSP search interface will have a list of products meeting their
search criteria displayed in the browser window. Clicking on the filename in the
display will bring up a dialog box to download the file to your computer. A similar
interface is available from the Web searches for HST, FUSE, IUE and EUVE. A column
labeled High-Level Science Products is displayed in the search results page. Click
on the number, which represents the number of HLSP associated with the observation,
to see a list of the associated HLSP. Clicking on the filename will bring up a dialog
box to permit a file download.
The information below is for projects intending to archive mission data sets within MAST. See the web page at http://archdev.stsci.edu/mast_guidelines.html for the most up to date requirements. Recommendations are included regarding:
The usefulness of mission data sets to future users will depend on how well this
information is preserved. MAST staff members can work with projects to assist them in
developing data products that will be useful to the general astronomical community for
the long term. We can review FITS headers, for example, for compliance with the standard and to confirm the information most frequently used for searching is present.
The astronomical community has adopted the Flexible Image Transport System (i.e. FITS)
format as the default standard for the exchange of data between institutions. The FITS
file format is platform independent, supported by many institutions, and endorsed by
both NASA and the IAU. For these reasons FITS is the recommended file format for
archiving data at STScI. A description of the FITS data format recommendations can
be found in the MAST Data Format Guidelines document. A online version of the FITS
Standard Document and the FITS User's Guide is also available.
It is recognized however that some archival data may be stored in other formats,
particularly for those projects which preceded the recent developments in FITS.
One example is the earlier-processed IUE data which is stored in a VICAR-based IUE
"GO" format. In some other cases, projects have distributed data as ASCII text files
or created auxiliary data sets as ASCII text files or postscript format. In these
cases, no attempt will be made to reformat the data sets before being archived within
MAST.
MAST, like other data retrieval systems, uses online database tables to search for
requested data sets. In many cases, projects store the same information in both the
catalog or database table and the FITS keywords. To simplify adding new data sets into
MAST, it is helpful if either
Obviously, project-delivered catalogs would greatly simplify the archiving of mission
data sets. In the absence of catalogs or target lists, we would appreciate guidance from the project staff concerning which of the FITS header keywords would be most useful for searching. We do not want to do a wholesale ingest of all header keywords
Catalogs should contain those fields which would most help users locate the desired
observation(s). Coordinates, observation date, exposure time, and target name are
fairly essential (depending on the method of observation), while parameters needed
for analyzing or interpreting archived data would be highly desirable. A target
classification entry has been very useful for users interested in particular types
of objects.
Although the MAST uses the Sybase Database Management system, tables can be exchanged
between most database systems by copying them to ASCII table files (be sure to
include a sufficient number of significant figures for representing floating point
values.) A WEB page containing an observation list may be an adequate replacement
for a database table. In either case, a description of the individual fields within
the table or list should be provided as well. The description should also define the
source of the entries. For example, it should state whether the coordinates were
supplied by the observer, or obtained from an existing catalog.
Project-supplied documentation in the following categories should be made available
for archive users:
Since MAST documentation will be accessed primarily from the WEB, documentation is
most useful if it exists online. Most text processing formats such as LaTeX or
Microsoft WORD (or standard ASCII files) can be fairly easily converted to HTML
by staff members. Large documents such as user manuals or data analysis guides
should be made available to users in several formats such as HTML for online
access, and POSTSCRIPT and/or PDF for downloading.
Some projects have written software to analyze and interpret raw and/or processed
data. These programs should be archived for future users. MAST will make project-supplied software available to requesters, although support for the software itself can not be provided. MAST currently maintains for example, the IUEDAC IDL software libraries, the UIT BDR software written in C and Fortran-77, and the EUVE EUV1.8 IRAF software.
A list of available Fits software packages is available from HEASARC. The list contains links to sites supporting general FITS readers and writers written in a variety of programming languages.
MAST welcomes the contribution of HLSPs from the astronomical community. The purpose
of this document is to establish the guidelines and policies for the contribution
of HLSP to MAST. Note that contributions of HSLP are now a requirement for the HST
Treasury and Legacy programs.
See the Guidelines for Contributing HLSP web site for the most current requirements.
If you wish to contribute HLSP or have any questions concerning these guidelines please send mail to archive@stsci.edu.
The guidelines for archiving non-reduced data from entire missions is a separate document (see previous section or the Data Archiving Guidelines ).
MAST encourages and welcomes HLSP including any of the following examples:
Literature, including paper preprints and reprints and analysis products several steps
removed from the HLSP are not considered HLSP and are inappropriate for this site.
HLSP should contain a short "README" file explaining how a given HLSP was created,
including details on the data reduction and pipeline processing version. It may in
addition contain the following types of files and products:
We may need to work with you to modify the format of some figures, so please hang
onto your plot-generating scripts!
It is important that contributors designate a contact person who will be available
to answer technical questions from users regarding details of the actual observations,
the processing techniques, or scientific quality issues that MAST may not be in a
position to answer. From experience, we expect that such queries will be infrequent.
We recommend the following standard formats:
File formats specific to particular software such as Microsoft, Tex, LaTex, and IDL
save-set formats are discouraged.
We also ask that these requirements be followed:
Since MAST is eventually going to make your HLSP available to the IVOA (International
Virtual Observatory Alliance), you might consider enhanceing the information content
in the header of your datafiles. You can scan through a list of optional header keywords for images and some examples from current HLSP headers. The respective information on spectra is also available.
All FITS format files must be verified before inclusion in the MAST archive. We suggest FITS verification be done early in the production of the HLSP, to avoid delays in archiving the product(s). MAST recommends that using the FITSVERIFY validator available from HEASARC. You can also verify your FITS files online at
http://fits.gsfc.nasa.gov/fits_verify.html.
Instructions for reading and writing FITS files can be found within the standard data
reduction packages such as IRAF and STSDAS, and within the CFITSIO package distributed
by HEASARC at http://heasarc.gsfc.nasa.gov/docs/software/fitsio/fitsio.html.
Data may be delivered electronically or on hard media such as DVD, CD or tape,
whatever is most convenient for you.
Some additional information may be useful at the time of initial contact:
MAST will point to any websites the project or contributors set up. If you wish to
ontribute a set of web pages, but have no place to host them, MAST may be able to
host them for you. If no web site is available, MAST will maintain a page that will
include basic information on the HLSP set. Even if you are planning your own web site,
we will want to archive the data at MAST where we can provide a long-term home for it.
We also would like you to consider having your web site point to the data here rather
than to a local copy. That ensures that the same data gets delivered from both sites
and allows us to easily and consistently track use of the products from the Treasury
programs. We can also more easily integrate these valuable products with our other
search interfaces. We are starting to make the HLSP available to the Virtual
Observatory, and that process is also easier if we archive the data here.
A list of acronyms and abbreviations used in the MAST web pages.
The MAST GALEX team provides separate tutorials for the GALEX web site. While the
GALEX site and interface have many things in common with the rest of MAST, there are
some differences due to a difference in servers and software.
This tutorial currently does not contain information about the Guide Star Catalog (GSC)
interfaces and data. Please see the GSC web pages for additional information.
The MAST web pages are compliant with "HTML 4.01 transitional" and "CSS levels 1 and 2". Cascading style sheets (CSS) and JavaScript are used for controlling the appearance of the navigation links so be sure they are enabled in your browser. We are also in the process of verifying compliance with Priority 1 accessibility and section 508 compliance.
The majority of MAST pages are created dynamically using a PHP-based template. The
template combines a MAST header, mission-specific banners, gutters, and footers with
staff/mission-generated content files. The pulldown menus use JavaScript. If JavaScript is disabled, one can still click the link and find the next level of links on the displayed page. Note JavaScript is also used in some web forms for such things as marking files for download and selecting output columns.
MAST HTML forms either call PERL CGI scripts, or use PHP. Several programs now use
XML for file formatting (e.g., the MAST mission search forms, and whatsnew and faq pages).
The MAST web site is basically organized by mission, with each mission having it's
own home page. For active missions that maintain their own web site (e.g., FUSE,
TUES, & GSC), links are made directly to the project-supported pages where appropriate.
Also, for some missions (e.g., EUVE), all or part of the data archive actually
resides at another data center but data can be retrieved transparently using MAST-style search forms.
The MAST home page itself (http://archive.stsci.edu/index.html) contains general information and links to cross-mission tools, software, documentation, and "high-level" prepared datasets. Besides the various cross-mission search tools, seach forms are also available for each individual mission.
All MAST pages follow a common page layout as much as possible.
All of the searches and web tools have help options with tips for how to use them.
The help button is generally placed in the top right of the screen for the searches
and tools (although for some older tools the help button may be elsewhere). In each
search page, the labels are all links to information about the item and when needed,
information about entering qualifications for that field. In the search results pages,
the column headings are links to information about the data in that column.
Most MAST missions have a listing of the fields in the mission observation
catalogs/database that are searchable via the "User defined fields" on the search
pages or via the MAST web services that permit searching. Click on the "Field
Descriptions" link on the search forms or on the links of interest in the description
of MAST web services.
Almost all documentation about a mission and its data was received from the mission
project so the level and quantity of documentation varies from mission to mission.
In general you can find documentation about the mission itself (e.g. Instrumentation
and Operations) by clicking on the "About mission" tab in the second navigation bar.
Documentation about the mission data can be found in the "About mission Data"
pullouts in the left menu.
For more information about the news item, click on the "headline". The news item
will usually contain links to any additional, relevant pages.
MAST NEWS is also available as an RSS News Feed.
MAST has an electronic archive newsletter that is sent to a mailing list of
self-subscribed recipients. MAST news is also reported in the quarterly STScI Newsletter.
2.5.1.3 Simple Cone Search
2.5.1.4 Simple Image Access Protocol (SIAP)
2.5.1.5 Simple Spectral Access Protocol (SSAP)
2.5.2 SOAP Services
2.5.3 RSS News Feed
2.6 MAST Tools
2.6.1 NED/MAST Cross Correlation Search
2.6.2 VizieR/MAST Cross Correlation Search
The VizieR/MAST Cross Correlation Search permits users to search for catalogs
held by VizieR and then either search them internally or to use them as input
for a MAST cross-mission search. There is a help page for these searches, but
below is an overview of the process.
2.6.3 Specview
2.6.4 MAST Coplotter
2.6.5 MAST Scrapbook
2.7 Hints for searching
2.7.1 Searching for Planets, Comets and Asteroids
2.7.2 Searching for HST data by Object Class
2.7.3 Search HST catalog by Region in the Sky
2.7.4 Searching with Ranges of Coordinates
2.7.5 Searching with Ranges in Time
Jul 1 2002 .. Aug 1 2002
2.7.6 Searching Across Multiple Missions
Missions
Link
HST
http://archive.stsci.edu/hst/abstract.html
FUSE
http://archive.stsci.edu/fuse/abstract.html
IUE
http://archive.stsci.edu/iue/abstract.html
EUVE
http://archive.stsci.edu/euve/abstract.html
2.7.9 High-Level Science Product Searches
2.7.9.1 Search by HLSP Project
2.7.9.2 Search HLSP by target
2.7.10 Performing Large Searches
2.8 Previewing Data
2.8.1 HST Previews
2.8.2 FUSE Previews
2.8.3 IUE Previews
2.8.4 Thumbnails
2.8.5 High-Level Science Product Previews
2.9 Retrieving Data From the Archive
2.9.1 Retrieving HST and FUSE Data From DADS
2.9.1.1 Registration
2.9.1.2 Retrieving Proprietary Data
2.9.1.3 Retrieval Options
2.9.1.4 Retrieving Data from the Staging Area
ftp archive.stsci.edu
accountname
password
cd stage/accountname
cd accountname54321
prompt
binary
mget *
quit
ftp archive.stsci.edu
accountname
password
cd stage/accountname
cd accountname54321
prompt
mdele *
cd ../
dele accountname54321
quit
2.9.1.5 Retrieving Large Amounts of HST Data from DADS
2.9.2 Downloading Other MAST Data
2.9.2.1 Downloading data from the search interface.
2.9.2.2 Downloading data via anonymous FTP
ftp archive.stsci.edu
anonymous
user@institution.edu
cd pub/astro/hut/data
dir
cd u-gem_152
prompt
binary
mget *
2.9.2.3 Downloading MAST data via the browser
2.9.2.4 Downloading ASCII versions of the spectral data
2.9.3 High-Level Science Products
2.9.3.1 Downloading Via Anonymous FTP
If you would like to download an entire set of HLSP, the most efficient method
might be to download the data via anonymous ftp. In general follow this procedure:
ftp archive.stsci.edu
(logon as anonymous)
cd pub/hlsp
2.9.3.2 Downloading via Browser
ftp://archive.stsci.edu/pub/hlsp/goods/v1/
By using ftp rather than http, you should get a dialog box when you click on the file
you wish to download. If you use http, then you will need to right click on the file
name to see the download options.
2.10 Data Archiving Guidelines
2.11 Guidelines for Contributing High-Level Science Products to MAST
2.11.1 File Formats, Keywords, and Naming Conventions
2.11.2 Delivery of Files to STScI
2.11.3 Web Support
2.12 MAST Documentation
2.12.1 Organization
2.12.2 Use the HELP for searches and tools
2.12.3 Mission Documentation
2.12.4 News
MAST maintains an archive of news items. The 5 most recent news items are posted
in the "News" section of the main MAST page and on the top "mission" pages. The news
on the MAST page contains news for the entire MAST archive. The news on the mission
pages contains news items relevant to that mission. The mission news may pertain to
changes in the web site that affect all missions. To see older news items click on
the "NEWS" link.
[Top]
[Prev]
[Next]
[Bottom]